190623_CLOCKS01

A finished clock with an inscription describing the history of the General Motors plant in Janesville sits in Chris Wells’ workshop. The clock is made out of materials from the former plant.

Employees of Janesville’s General Motors plant probably didn’t pay much attention to the maple paneling in the building’s foyer.

But Chris Wells of Janesville and his son, Kevin, noticed it.

“It was the prettiest wood in the entire building,” Chris said.

The two retrieved about 2,000 board feet of the paneling earlier this spring before workers demolished the last standing section of the storied plant.

Now, they are melding time and history in clocks made from the wood.

Each timepiece, with a maple face and back laminated on pine, sells for $85, which includes shipping and handling. The clocks are slightly more than 8 inches long and 4½ inches high.

“My aim is to get one in the hands of the people who actually worked there,” Chris said.

190623_CLOCKS02

Chris Wells carves a hole in a piece of wood from the main lobby of the former Janesville General Motors plant Tuesday at his workshop in Janesville. Wells makes clocks out of the materials from historic buildings.

He has placed ads in newspapers in Fort Wayne, Indiana, Fort Worth, Texas, and Kansas City, Missouri, where workers transferred when the Janesville plant was idled, then closed.

As of early last week, 150 clocks were finished.

The back of each has a laser photo from the 1950s and an inscription, which pays tribute to the “hard work and dedication of the assembly plant workers.”

Sometimes Chris gets up at 2 a.m. to cut, finish and insert clock movements in more than a dozen clocks before the sun comes up.

“My dad used to say there’s a lot to be done instead of lying in bed,” Chris said.

He owns CW Contracting of Janesville, which does both commercial and residential remodeling, construction and landscaping.

But he also carries on a tradition, started by his father, Al Wells, who died last year.

Al was the family’s original clockmaker, who came up with the idea of making clocks out of the wood in historic buildings. Jeannette, his wife of more than 50 years, supported his effort.

“They were a team,” Chris said.

190623_CLOCKS03

Chris Wells uses an orbital sander to create a clock out of wood from Janesville’s former GM plant on Tuesday.

He remembers his dad crafting his first clock out of wood from the stage of the 1870 Myers Theater, which was torn down in 1977.

“Dad watched people come and take a brick from the old theater,” Chris said. “He thought he could do something nicer than a brick. His idea was to make a memento with a purpose.”

Al figured a timepiece would be functional and gazed upon regularly.

He built a large mantel clock, which took about a month to make and sold for $400.

“We couldn’t sell them,” Chris said. “Dad got frustrated and went to the band saw and changed the whole way we did things. Instead of making a big fancy clock for a lot of money, we made smaller, simpler pieces.”

Since then, Chris said the family has saved the wood from a few hundred old buildings by transforming it into clocks.

“We don’t pay anything for the wood, ever,” Chris said. “This is donated wood. We do the work and resell it.”

In Janesville, lumber has come from historic churches, a longtime bar, the country club and even a grand tree.

The Bower City elm stood on Milwaukee Street and was one of the city’s oldest and biggest trees to die of disease.

The Wells family also has gone well beyond the city to preserve pieces of the past.

Among the lumber they collected are boards from a tobacco warehouse in Edgerton, a lead and zinc mine in Shullsburg and the Hotel Washington in Madison.

190623_CLOCKS04

Chris Wells pushes a piece of wood from the Janesville GM plant against an orbital sander Tuesday at his workshop in Janesville.

Some wood came from remodeling projects.

When the massive World War II battleship U.S.S. Wisconsin had its decks refurbished in the late 1980s, the Wells family acquired some of the old lumber.

Chris held up a piece of weathered teak.

“It was in every battle the ship went through,” he said.

The family documents each historic site with photos of family members getting the wood.

“Documentation is an important part of what we do,” Chris said.

Kevin represents the third generation of clockmakers.

He got his start shoveling sawdust out of the shop after school.

He is excited about the GM pieces.

“I put in a lot of time and effort to get them going,” Kevin said.

He added:

“I see a lot of significance in these clocks. A lot of my friends while growing up had family who worked at the plant.”

190623_CLOCKS05

Chris Wells uses a clock that belonged to his late friend Vera to trace a shape onto a piece of wood from the former Janesville GM plant Tuesday at his Janesville workshop. Wells said Vera wanted to help with the project, so he ‘put her back to work’ by using her clock as the stencil for the new clocks.

Anna Marie Lux is a Sunday columnist for The Gazette. Call her with ideas or comments at 608-755-8264, or email amarielux@gazettextra.com.

12
0
0
0
0